toyrest.blogg.se - Loxone config

You can observe the output in the monitor window. This is an important point to note: Only extensions that are added into the program the Miniserver is running will be updated!Īfter the update, the Miniserver reboots automatically. Any extensions that are connected to the Miniserver and flashing green will also have the update applied to them. STEP 4: INSTALL THE UPDATEĬlick on “Install update” to start the updating process. When updating the Miniserver, we recommend selecting the box “Proceed with update even if the Miniserver already has the current firmware version”. You can now choose whether or not the Miniserver keeps the existing files. This opens a window called “Loxone Miniserver Firmware Update”. Select the “Maintenance” tab and click on “Miniserver Firmware Update”. Start the configuration software and connect to the Miniserver. UPDATE USING THE CONFIGURATION SOFTWARE STEP 1: CONNECT TO THE MINISERVER Your Partner will be happy to assist you. This is because before the update is started, the program should be loaded from the Miniserver and saved locally so that any latest user changes (lighting scenes etc.) are preserved.

We recommend that the person who performed the installation and configured the Miniserver also performs any updates.

Perform the update as described below to update the connected extensions.

Put the newly formatted SD card with the backup into the Miniserver.

Take the old SD card from the Miniserver and keep on site for a backup.Format a new SD card with the backup you just saved (choose Format SD Card from the Maintenance tab in Loxone Config).Take a Backup of the SD (choose from the Maintenance tab in Loxone Config).To run the update locally we recommend the following procedure, however updates can be done remotely too: You can use our installation instructions page to help you when installing Loxone Config. Whilst Loxone Config will run on XP please note this is no longer actively maintained and supported.īefore updating the Miniserver, please make sure you have the latest version of the configuration software installed. The configuration software is compatible with Windows Vista, Windows 7 and Windows 8 onwards.